- What is CREODIAS?
- Computing & Cloud
- Data & Processing
- Pricing Plans
- Fight with COVID-19
- Examples of usage
- EO Data Access (R)evolution
- Land cover classification using remote sensing and AI/ML technology
- AI-based satellite image enhancer and mosaicking tools
- Monitoring air pollution using Sentinel-5P data
- Species classification of forests
- Enabling AI / ML workflows with CREODIAS vGPUs
- Satellite remote sensing analyses of the forest
- Satellite-based Urban Heat Island Mapping on CREODIAS
- Old but gold - historical EO data immediately available and widely used on CREODIAS
- CREODIAS for emergency fire management
- AgroTech project as an example of how CREODIAS can be used for food and environmental research
- Monitoring Air Quality of Germany in Pre vs During COVID Lockdown Period
- Common Agricultural Policy monitoring with Earth Observation
- Applications of CREODIAS data
- Meteorological data usage on the CREODIAS platform
- Building added value under Horizon Europe with CREODIAS
- CREODIAS: Introduction to SAR Sentinel-1 data
- Land subsidence and landslides monitoring based on satellite data
- Satellite imagery in support of the Common Agriculture Policy (CAP) and crop statistics
- Useful tools for data processing, available on CREODIAS platform
- CREODIAS for hydrological drought modelling
- CREODIAS for managing Urban Heat Islands
- CREODIAS for Digitising Green Spaces
- CREODIAS for Air Quality
- Advanced data processors on CREODIAS
- CREODIAS for your application
- Solutions for agriculture with CREODIAS
- Earth Observation data for Emergency response
- Security Applications with Satellite Data
- Climate Monitoring with Satellite Data
- Water Analysis on CREODIAS
- CREODIAS for land and agriculture monitoring
- Solutions for atmospheric analysis
- Example of tool usage
- Processing EO Data and Serving www services
- Processing and Storing EO
- Embedding OGC WMS Services into Your website
- GPU Use Case
- Using the EO Browser
- EO Data Finder API Manual
- Use of SNAP and QGIS on a CREODIAS Virtual Machine
- Use of WMS Configurator
- DNS as a Service - user documentation
- Use of Sinergise Sentinel Hub on the CREODIAS EO Data Hub
- Load Balancer as a Service
- Jupyter Hub
- Use of CREODIAS Finder for ordering data
- ESRI ArcGIS on CREODIAS
- Use of CEMS data through CREODIAS
- Searching, processing and analysis of Sentinel-5P data on CREODIAS
- ASAR data available on CREODIAS
- Satellite remote sensing analyses of the forest
- EO Data Catalogue API Manual
- Public Reporting Dashboards
- Sentinel Hub Documentation
- Integration Guides
- OGC API
- Custom Processing Scripts
- Legal Matters
- Partner Services
- About Us
Your Processing Environment
EOData Finder API
Using http API to query EO Data Finder
The limit may be exceeded, for example, going to page 101 with 2000 results in the CREODIAS Finder API. The requests over the limit will be rejected with the code 400.
We encourage you to limit your inquiries by geographic or temporal area.
The limit is 60 requests per minute, per source IP address.
The requests over the limit will be rejected with the code 429.
All queries may be executed as simple HTTP-Get calls, by typing the query in web browser address line, by using any HTTP client, e.g. curl or wget, or from inside of users’ program. The database is accessible free and anonymously (open for anonymous access for everyone, no authorization is used) It may be accessed both from the internal network (virtual machines in Creodias) and from outside, e.g. your home computer. Note, that the actual EO data themselves are restricted to to Creodias users, only the catalogue (EO Data Finder) is open.
The queries may produce their results either in JSON or XML formats. To select the appropriate form, use the corresponding engine in the URL:
http://datahub.creodias.eu/resto/api/collections/search.json? - for JSON
http://datahub.creodias.eu/resto/api/collections/search.atom? - for XML response
The responses are by default formatted in compact form for machine interpretation.
The responses as text lists of products are not implemented directly yet. If you need just such a list, without additional info, provided by JSON, the solution is to filter out the formatted JSON response. For example, the following filtered command returns name list of 100 most recent Sentinel-1 products.
$ wget -O - "http://datahub.creodias.eu/resto/api/collections/Sentinel1/search.json?&maxRecords=100"
Most queries are case-sensitive.
The data are organized in so-called collections, corresponding to various satellites. A query may search for data in all collections, or in one particular collection only. If only one satellite is in the field of interest, the second approach is faster and more efficient, than filtering the general query. For example, to find 10 most recent Sentinel-2 products with cloud cover below 10%, the query should look like:
$ wget -O - "http://datahub.creodias.eu/resto/api/collections/Sentinel2/search.json?cloudCover=[0,10]&maxRecords=10"
while if the collection field is missing in the URL, the products from all the satellites are returned:
$ wget -O - "http://datahub.creodias.eu/resto/api/collections/search.json?&cloudCover=[0,10]&maxRecords=10"
As for today the following collections are defined and may be used:
Note, that collection names vary a bit from satellite names, as they are used in EO Data repository. For example, the collection is named Sentinel2, while in the repository its data are located within /eodata/Sentinel-2/.... branch of the repository tree.
Output sorting and limiting
By default, maximum 10 most recently published products are returned only. You may change the limit (beware of long execution time for queries about thousands of products) using the phrase
If the query is very general and the number of matching products is large, the next pages of products may be retrieved
You may also change the order of how the products are presented, using the phrase like
will sort the output by observation date rather than by publication date. The following orderings are implemented:
published - the date when the product got published in our repository (default)
startDate - the date when the observation was made
cloudCover - the cloudiness of the scene
each of them may be accompanied by
sortOrder=ascending or sortOrder=descending
For example the query
will return 20 least cloudy products from July 2016, while the next query would return the next 20, a little bit cloudier, such product:
The last sub phrase, selecting the next page of the results, may be also written as page=2
The formal query is invoked as a sequence of sub phrases, separated by &. The result is a conjunction of all sub phrases. It is impossible to use an alternative in the question. The query must be specified as a formal query.
The example of formal query - about cloudless (cloud cover below 10%) products from Warsaw Summer 2016:
The queries are in form param=value or param=[minvalue,maxvalue]. Most of the parameters are common for all collections, but some are specific for some them (e.g. cloudCover applies to optical satellites, but polarisation applies to radar ones), or just single one.
Geography and time-frame
The common set of parameters are:
startDate, completionDate - the date limits of the observation. The time may also be specified, e.g. 2016-10-01T021:30:00Z Format as defined by RFC-3339
publishedAfter, publishedBefore - the date limits when the product was published in our repository
lon, lat - geographical position, expressed in military style (EPSG:4326, as decimal fraction of degrees, positive for eastern latitude and northern longitude)
radius - region of interest, defined as a circle with centre in point determined by the longitude and latitude with radius expressed in meters (it won't work with point manually selected in EOFinder)
geometry - region of interest, defined as WKT string (POINT, POLYGON, etc.)
box - region of interest, defined as the rectangle with given (west,south,east,north) values
name - region of interest, given as name (city name, country name, etc., the same as in natural language queries)
Region of interests may also be specified by KML file, attached to HTTP/POST query, e.g.
curl -X POST http://datahub.creodias.eu/resto/api/collections/Sentinel2/search.json?startDate=2016-07-01&completionDate=2016-08-31 –data @file/my.kml
will find all Sentinel-2 data from Summer 2016 from the area described as KML file my.kml .
Note that KML queries are restricted to simply connected areas (simple polygons).
Some terrain-like feature masks are not permanent but describing a single scene only. The most commonly used such feature is cloudiness, or cloudCover, which is defined for most of the products coming from optical sensors. For example:
selects only those scenes, which are covered by clouds by no more than 10%.
Caution: to be meaningful, the cloudiness must be provided with each product, while in many products is missing. If the cloudiness is unknown for the scene, it is marked by a value of 0 or -1. cloudCover=0 is therefore ambiguous: it may either mean totally cloudless sky or the cloudy scene for which cloud cover had not been estimated during original data processing.
instrument - meaningful only for satellites equipped with multiple instruments. The possible values are satellite specific.
productType - the actual types possible are specific for every satellite. For Sentinel-1 data you may select for example productType=GRD for products processed in standard mode for land observations.
sensorMode - also satellite and sensor specific. E.g. (for Sentinel-1):
orbitDirection - ascending or descending. For most heliosynchronous satellites descending orbits means the day scenes, while ascending means night ones. For many optical satellites (e.g. Sentinel-2) only day scenes are published.
resolution - expected spatial resolution of the product defined in meters.
Some additional parameters are strictly satellite-specific, e.g. polarisation, which is defined only for Sentinel-1
For every satellite (collection) its set of query-able parameters may be obtained by a query like:
The resulting XML file provides full list of the parameters for the collection, with their very brief descriptions.
Order API Documentation
For comprehensive Order API description you can visit this pages::
How to order products using finder API?
and new version ofAPI: